|Hadi Industrial Area, Nancheng District, Dongguan, Guangdong, Chinaemail@example.com|
|Product Name:||Precision Laminating Machine||Max Rewinding Diameter:||400mm|
|Max Winding Diameter:||500mm||Sticking Speed:||50m/min|
|Power Supply：:||220V 50HZ||Maximum Discharge Width:||300|
|Laminating Precision:||±0.15mm||Total Power:||0.85KW|
Multilayer Laminating Machine For Plastic Bottle
Description of operating panel
1-7 Magnet powder controller: Adjust tension of feeding unit and winding unit.
8-10 Adjuster for winding motor: Adjust winding speed of winding unit.
11. Adjustment of laminating speed: Adjust lamination speed .
12. Start button: Operate main motor.
13. Stop button: Stop main motor.
14. Inching button: Inch motor.
15. Power switch: Power on/off.
16. Emergency stop button: Cut off power of main motor.
1. First, lift up the upper laminating roller, and place material on the feeding shaft and fix it. Then put the material on the winding shaft through tailstock roller and laminating roller, adjust its parallelism back and forth and fix it. Finally, put down laminating roller to start laminating operation.
2. Winding. The feeding shaft has tension adjustment function, which adjusts tension as per tightness of material.
3. The laminating roller has the function to adjust pressure and control distance between two rollers as per need of material to be laminated.
Servicing and notes for attention
1. Please use voltage of 220V properly. Tolerance of input voltage shall be ＋/-20V and the machine shall be grounded properly to prevent from injury as a result of electricity leakage.
2. Be sure to turn off the power and take off the plug before the machine is adjusted to ensure safety. Keep children and people other than operators away to prevent from any danger.
3. There shall not be any water being injected out when an air gun is used to clean dust in the electrical box. In this case, please discharge water out of the air compressor.
4. Placement of the machine: Wall surface of rear rack of the machine shall be over 500mm away from the wall, and there shall be a maintenance space reserved at two sides.
North America,South America,Western Europe,Eastern Europe,Eastern As,North America,North America, South America ,Western Europe,Eastern Europe,Eastern Asia,Southeast Asia,Middle East
Main Technical Parameters
|Maximum discharge width||300|
|Maximum discharge diameter||400mm|
|Maximum winding diameter||500mm|
|Power Supply||220V 50 HZ|
Other Type of Main Technical Parameters
|Max Feeding Width||210||300||350|
|Max Rewinding Diameter||400mm||400mm||400mm|
|Max Winding Diameter||500mm||500mm||
|Power supply||220V 50HZ||220V 50HZ||220V 50HZ|
Guangdong Kunlun Electronic Equipment Technology Co., Ltd.
We are a manufacture founded in 2003, with our own 3 factories producing the metal parts, painting jobs and assembly line for our machines.
We have passed SGS, ISO9000, 9001 and CE certification.
Welcome to visit our factory in China.
All of our products are made according to customers’ requests .
Your sample is available.
Packing & shipping:
Packaging & Shipping of Cutting Machine:
Inner Package: Protective Film, etc
Outside Package: wooden Case