|Hadi Industrial Area, Nancheng District, Dongguan, Guangdong, Chinaemail@example.com|
|Place of Origin:||China|
|Minimum Order Quantity:||1 set|
|Packaging Details:||wooden case|
|Delivery Time:||25-30 working days|
|Payment Terms:||T/T, D/A|
|Supply Ability:||100 set / month|
|Cutting AreasSize:||210*190mm,210*190mm,350*320mm||Cutting Speed:||200 Time/min|
|Main Engine P Ower:||2.2KW||Power Supply:||380/220V 50HZ|
|Max Feeding Width:||210mm-350mm|
Flat Bed Flexo Shrink Sleeve Label Die-cutting Machine Equipment
The machine adopts computer numerical control system with advanced features, can be equipped with two electric eye tracking and positioning device, high precision, accurate installation of metal mold alignment, and automatic exhaust device on the multilayer laminating, laminating, waste collection, strong applicability, wide application, is the ideal equipment for electronic materials, non metallic materials fit the die-cutting.
It can be fed into the type of punching waste discharge laminating die cutting (hot stamping) waste discharge volume cutting
Pressure sensitive label, dacron film label and laser anti-counterfeit trademark die-cutting, especially in the electronics industry pet, adhesives, insulating materials, shielding materials, 3M, Sony, Nitto, test, PORON and other special tape molding, LCD, backlight, diffuser, reflector, black and white glue, etc.
Four blocks upper mold plate, two blocks lower mold plate, a set paper feeder, a set paper cutting machine, infrared safety device
Stamping device, winding device, metal mold device, full cut, Automatic discharging device for half or full break, multi laminating waste discharging device
Discharge, scrap motor control instructions:
Discharge in machinery into the initial state, and the collection of waste motor group to enter the standby mode, according to different work needs, choose a motor to participate in the work. The motor controlled by a potentiometer can realize stepless speed regulation, motor switch conduction through the button, can achieve positive and negative direction of rotation, and the feeding shaft the friction mechanism end closely, can control the rotating shaft torque, to satisfy the mechanical performance requirements.
|Max feeding width||220mm||280mm||350mm|
|Cutting speed (Time / Min)||200||200||200|
|Main engineer power||2.2kw||2.2kw||2.2kw|
Packing & shipping:
Packaging & Shipping of Cutting Machine:
Inner Package: Protective Film, etc
Outside Package: wooden Case
4 , Application:
|Earthquake products||Rubber pads, 3M, EVA, high expansion|
aluminum foil, copper foil, PVC, PET, brown paper, Sponge sheath, Pearl cotton sheath.
|Glue stick products||
all kinds of electron industry and IT industry such as electron, electric appliance, rubber mat of mobile phone, Silicone gel sheet, double sides adhesive tape and so on. The glue
product which used to motor industry.
|(1) High speed;|
|(2) Easy to operate;|
|(3) High precision;|
|(4) High efficiency.|
1, the new machine before the start of the preparation, according to the power supply, remove the knife template, the die-cutting pressure to a minimum, open the power switch, point to move the machine to check whether the normal operation of the Department
2, the knife mold debugging: die cutter is arranged on the template, and then on the template, and then the upper template and inserted into the upper die seat dovetail groove, a locking handle is inserted into the machine in plywood template is not sticky on the surface a 1mm thick, locking handle, and then gradually increased until the pressure. The paper cut off material does not break into it.
3, string material: will be required to cut the drum material through the feeding machine and the host in turn string, the string of paper in order to feed the tail of the end of the Department - the Department of the Department of roller die - pull the material department - slicing machine or winding machine
4, fit: when will fit the materials required for fitting materials on the middle shelf collection of waste discharging rod, rod through the transition from the middle laminating steel roller and adhesive material and pressure laminating roller handle, the steel roller and the rubber roller close together. The material for a longitudinal run phenomenon may fit at this time, need to adjust the combined seat rotation adjustment handle, the lamination roller axis and the vertical material.
5, waste collection: after modeling material by pulling cylinder on the first pressing wheel pull to collect waste (waste collection rod rod can be clamped in the waste paper edge glued cardboard cylinder) waste collection rod rotation speed, can pass the governor to control, can be controlled by the switch of positive and negative direction of rotation.
6, cutting (winding) if the product needs to be trimmed set can be cut by slicing machine for winding the winding machine can roll.
Phone: 86-13926895009 E-mail: firstname.lastname@example.org
Tel:86-0769-22432008-8003 Fax: 86-769-22432005
Compay Name: Guangdong Kunlun Electronic Equipment Technology Co., Ltd.
Address:NO.6,Xinnan Road, Hadi Industrial Area, Nancheng District, Dongguan, Guangdong, China