|Hadi Industrial Area, Nancheng District, Dongguan, Guangdong, Chinafirstname.lastname@example.org|
|Product Name:||Precision Laminating Machine||Max Rewinding Diameter:||400mm|
|Max Winding Diameter:||500mm||Sticking Speed:||50m/min|
|Power Supply：:||220V 50HZ||Maximum Discharge Width:||300|
|Laminating Precision:||±0.15mm||Total Power:||0.85KW|
Multifunctional Laminating Waste Discharging Machine Applied to Liquid Crystal Displays
This machine is a multifunctional laminating waste discharging machine, multilayer material jointing waste, can be applied to the mobile phone, computer, liquid crystal displays and other electronic label industry adhesive tape adhesive composite equipment products. Reeling waste magnetic powder tension control is adopted. A composite single, double-sided adhesive with bottom paper function. At the same time can be more complex and has a local joint function.
North America,South America,Western Europe,Eastern Europe,Eastern As,North America,North America, South America ,Western Europe,Eastern Europe,Eastern Asia,Southeast Asia,Middle East
Main Technical Parameters
|Maximum discharge width||300|
|Maximum discharge diameter||400mm|
|Maximum winding diameter||500mm|
|Power Supply||220V 50 HZ|
Description of operating panel
1-7 Magnet powder controller: Adjust tension of feeding unit and winding unit.
8-10 Adjuster for winding motor: Adjust winding speed of winding unit.
11. Adjustment of laminating speed: Adjust lamination speed .
12. Start button: Operate main motor.
13. Stop button: Stop main motor.
14. Inching button: Inch motor.
15. Power switch: Power on/off.
16. Emergency stop button: Cut off power of main motor.
1. First, lift up the upper laminating roller, and place material on the feeding shaft and fix it. Then put the material on the winding shaft through tailstock roller and laminating roller, adjust its parallelism back and forth and fix it. Finally, put down laminating roller to start laminating operation.
2. Winding. The feeding shaft has tension adjustment function, which adjusts tension as per tightness of material.
3. The laminating roller has the function to adjust pressure and control distance between two rollers as per need of material to be laminated.
Servicing and notes for attention
1. Please use voltage of 220V properly. Tolerance of input voltage shall be ＋/-20V and the machine shall be grounded properly to prevent from injury as a result of electricity leakage.
2. Be sure to turn off the power and take off the plug before the machine is adjusted to ensure safety. Keep children and people other than operators away to prevent from any danger.
3. There shall not be any water being injected out when an air gun is used to clean dust in the electrical box. In this case, please discharge water out of the air compressor.
4. Placement of the machine: Wall surface of rear rack of the machine shall be over 500mm away from the wall, and there shall be a maintenance space reserved at two sides.
Guangdong Kunlun Electronic Equipment Technology Co., LTD
It is located in the China’s manufacturing city --- Dongguan, is a specialized machinery equipment
manufacture which integrates R&D, manufacture, sales, and service together. The company has three
factories and covering an area of about 8000 square meters. There are more than three hundred people
in the company.
In recent ten years, the company was trusted and supported by customers.It has gained the recognition
and acclaim from Foxconn, Bedi, AOC, Samsung, Hengwei etc.. Products are exported to the United States,
Germany, India, Vietnam, Malaysia and other international markets. The company has perfect service system.
Company has special after sale service staff to repair the machine and maintenance the machinery regularly
for the customer. Company has the sales and after-sales service offices in Suzhou, Tianjin and Qingdao.
The business philosophy of the Company is "strive for the survival by the quality, seek development with
technology, market-oriented, service is the aim " . Sincerely to provide high quality die-cutting equipment for